Roof Mounted Fans

The AX roof-mounted is an expanded capacity direct drive axial exhaust model. This model has cast aluminum blades and hub assembly, heavy gauge spun curb cap to reduce inlet losses, a butterfly damper section for backflow prevention, and a windband section to protect the butterfly dampers from debris. Typical applications include clean air, fume exhaust, and spark resistant construction.

The RBU is a belt drive, roof mount axial fan for use in general clean air exhaust applications. The unit exhausts air up and away from the roof surface. Units feature a steel housing, with a fabricated steel propeller.

Model RBUMO is a belt-driven fan for roof-mounted applications to exhaust high-temperature air away from the mounting surface. Fans feature a fabricated steel propeller with galvanized steel housing and optional UL-793 rating for high temperature.

Model RDU is a direct drive, roof mount axial fan suitable for general clean air exhaust applications where the unit exhausts air up and away from the roof surface. Units feature a steel housing, with a cast aluminum propeller.

This belt drive model has a welded housing, powder coating with cast aluminum hub and blades. Typical applications include clean air, fume exhaust, and spark resistant construction. Features include a belt tube and bearing cover protecting drives from airstream, butterfly dampers with a rolled edge for increased strength, and gasket covered edges for quiet closure. The model has a maximum operating temperature of 180 °F.

The motor mounted on model TAUB-L/H is out of the airstream. This makes it suitable for clean air, high-temperature process exhaust or high-temperature emergency smoke removal. The TAUB-L/H has rolled damper blades, gasket covered edges, fully welded and coated housing with steel blades. Its maximum continuous operating temperature is 500 °F.

The model G is a direct drive, spun aluminum fan, designed for roof mounting on a curb for general, clean air exhaust applications. Units feature a spun aluminum housing and have certifications including seismic, high wind and hurricane.

Use this belt drive centrifugal roof exhaust fan for general clean air applications where the air discharge is downward, toward the roof surface. The GB features a spun aluminum housing..

Model LB is a belt drive, fabra hood-style fan, designed for roof mounting in clean air exhaust applications, where height and aesthetics are a concern. The units feature a backward-inclined wheel, with a low silhouette housing.

Model RSF is a belt drive, roof-mounted supply fan. It provides unrestricted airflow and maximum weather protection. Each unit features a forward-curved wheel and heavy gauge galvanized steel housing.

Use this belt drive centrifugal roof or wall mounted fan for exhausting contaminated or grease laden air. With a single piece, continuously welded, spun aluminum housing, exhaust air is discharged away from the mounting surface.

Model CUE is a direct drive fan designed for roof or wall mounting, where the exhaust air is directed away from the mounting surface. Constructed of a single piece, continuously welded housing, this fan is used for exhausting contaminated or grease laden air.

The USGF is a belt drive fan ideal for heavy grease exhaust applications where cooking requires large amounts of grease and/or solid fuels. Units feature a non-stick coated steel wheel with a steel housing and curb cap. The unit is powder coated for added protection.

Model AE is a direct drive fan designed for roof mount applications exhausting relatively clean air. Fans feature spun aluminum housings and fabricated aluminum propellers.

The RPBR is a belt drive, roof-mounted reversing fan that moves air in both exhaust and supply modes. These feature cast aluminum airfoil blade propellers and a fabra hood-style housing constructed of steel or aluminum.

This belt drive, roof mount, filtered reversing fan moves air in both exhaust and supply modes. The fan features cast aluminum airfoil blade propellers and an aluminum or steel fabra hood-style housing.

Model RPDR, a direct drive, roof-mounted reversing axial fan, moves air in both exhaust and supply modes. These fans feature cast aluminum airfoil blade propellers and a fabra hood-style housing constructed of steel or aluminum.